adapter VGA to TV RGB

adapter VGA to TV RGB, can also be used to make a good component cable can be made from CAT5. I had someone ask me if it would work. I thought is should work great, so I made a 50 foot cable and it did! The person who asked about it is now using the 50’ CAT5 Component cable with his Infocus X1 DLP projector. Just use three of the four pairs, one each, for Y, Pr, and Pb. Untwist the pairs as little as possible and solder on an RCA connector to each end, one conductor to the center pin and the other to the shell. I added some shrink tubing to the pairs to give it some extra strength, but this is not required. Total cost was about $10, with the cable from Lowe’s and the RCA connectors from Radio Shack